供应水产饲料膨化机(YSEX系列)

适用于加工沉性、浮性水产饲料、宠物料、观赏鱼料等，颗粒直径Ф0.6-16mm。 平底刮仓机构+变频调速喂料器，确保物料均匀连续输出。 双轴异径差速调质器使物料与蒸汽在剪切、搅拌的强烈作用下充分糊化，调质时间可长达180秒。 凡与物料直接接触的部件均采用不锈钢材料。 螺套采用夹层结构，夹层中可通入蒸汽或冷却水，有效控制膨化温度；并设有直接向膨化内腔喷射蒸汽或水的装置。 移动式切粒机构切刀弹性好，柔和贴合模板平面；切刀可在六个方向上调节，操作灵活简便。变频调速电机可轻松实现切料长度的控制。 主轴承箱结构采用专有技术设计，内置进口SKF轴承。 多种螺杆配置方案，可适应不同配方原料生产需求。 螺杆、模板均采用真空淬火处理，加工精度高，使用寿命长。 所有蒸汽阀等操作部件均采用人性化设计，方便操作调控。 配有电控箱。 Suitable for extruding of submersible/float aquatic feed ,pet feed,ornamental fish feed and so on.The pellet size is aboutФ0.6-16mm. Flat-bottomed scraper mechanism and feeder controlled by transducer make sure that the materials can be fed evenly and constantly. The DDC conditioner can make the materials have fully gelatinization of starch,which is brought about by a combination of hot steam and mechanical shear/mixing.The materials may remain in the conditioner for a time over 180S. All of the parts which are directly in contact with the materials are made of stainless steel. Screw sleeve adopts jacket construction,which can be injected in with hot steam or cooling water; thus the extruding temperature can be controlled effectively. Also the steam and water can be directly injected into the extruding chamber through special mechanism. Removable cutting mechanism use knives with good elasticity,which attacm to the die plate tenderly and can be regulated in six directions,can be operated quickly and simply.The transducer-controlled rate regulator can easily control the pellet size of the products. Main bearing box structure adopts special technical design,with SKF bearing inside. Variably configurations of screw bolts can match the producing demands for different formulas and raw materials. Screw bolts and dies are processed through vacuum quench treatment,also be processed with high processing precision and have a long using longevity. All the operating parts like steam valves etc.adopt the humanization design,in order to facilitate actual operations. Electric cabinet equipped.